Difference between revisions of "Divide a house into separately bookable units"

From Beds24 Wiki
Jump to navigation Jump to search
Line 88: Line 88:
  
  
'''Note''': If you are using dependencies please test thoroughly to make sure your set up reflects your rules.
+
'''Note''': If you are using dependencies please test thoroughly to make sure your set up reflects your rules. If you are connecting one physical room more than once to a booking channel you are risking overbookings.  
  
  
  
 
Keyword: separate, separately, divide, dependent, dependency
 
Keyword: separate, separately, divide, dependent, dependency

Revision as of 12:36, 7 August 2017

This page explains how to use room dependencies to offer one unit as a whole and at the same time offer parts individually. 

1 Example 1

A holiday house consists of three separately bookable apartments (Apartment1, Apartment2 and Apartment3) and can be rented in full. To set this up you will need four rooms in SETTINGS -> ROOMS:

  • House
  • Apartment1
  • Apartment2
  • Apartment3

Go to SETTINGS->PROPERTIES->ROOMS->DEPENDENCIES and set:

House

  • Requires Availability in: Apartment1 and Apartment2 and Apartment3

Leave all other settings at the defaults.


Apartment 1, Apartment 2, Apartment 3

  • Include Bookings from: House

Leave all other settings at the defaults.

2 Example 2

A holiday house which consists two separate apartments (Apartment1 and Apartment2). Apartment2 can be split up into two separately bookable apartments (Apartment2A and Apartment2B). Also the complete house is for rent. To set this up you will need five rooms in SETTINGS -> ROOMS.

  • House
  • Apartment1
  • Apartment2
  • Apartment2A
  • Apartment2B

Go to SETTINGS->PROPERTIES->ROOMS->DEPENDENCIES and set:

House

  • Requires Availability in: Apartment1 and Apartment2 and Apartment2A and Apartment2B

Leave all other settings at the defaults.


Apartment 1, Apartment 2, Apartment 2A, Apartment 2B

  • Requires Availability in: House
  • Include Bookings from: House

Leave all other settings at the defaults.

3 Example 3

A lodging rents 3 rooms. These three rooms are rented individually as B&B room or all together as a flat. The flat is also offered as house (the house and the flat are really the same).

To set this up you will need 5 rooms in SETTINGS -> ROOMS.

  • House
  • Flat
  • Room 1
  • Room 2
  • Room 3

Go to SETTINGS->PROPERTIES->ROOMS->DEPENDENCIES and set:

  • Rooms: set ""Include Bookings from" = Flat and House
  • Flat - Requires Availability in: Room 1, Room 2, Room 3 and "Combination Logic"= All rooms must be available
  • House - Requires Availability in: Room 1, Room 2, Room 3 and "Combination Logic"= All rooms must be available

4 Example 4

A holiday house consist of 2 apartments (apartment A and apartment B) which are rented together and individually. Apartment B consists of 3 rooms which are also rented separately.

To set this up you will need 5 rooms in SETTINGS -> ROOMS.

  • House
  • Apartment A
  • Apartment B
  • Room 1
  • Room 2
  • Room 3

Go to SETTINGS->PROPERTIES->ROOMS->DEPENDENCIES and set:

  • Rooms: set ""Include Bookings from" = House
  • Apartment A: Do not set any dependencies
  • Apartment B: Requires Availability in: Room 1, Room 2, Room 3 and "Combination Logic"= All rooms must be available
  • House: Requires Availability in: Apartment A, Apartment B and "Combination Logic"= All rooms must be available


Note: If you are using dependencies please test thoroughly to make sure your set up reflects your rules. If you are connecting one physical room more than once to a booking channel you are risking overbookings. 


Keyword: separate, separately, divide, dependent, dependency