TTLock
This page is about the menu (SETTINGS) APPS & INTEGRATIONS > TTLOCK
For Beds24 the normal channel manger fees apply.
Contents
1 Capabilities
- Beds24 can send booking data to TTLock locks.
2 Limitations
- The lock does not have to be connected to the internet to receive bookings, however it must be connected to the internet to delete or receive updates for bookings.
- The start and end times of passcodes must be on the hour, for example a start time of 9:20 will actually start at 9:00.
- Passcodes must be used at least once within 24 hours of their start times, otherwise they will become invalid.
- Passcodes cannot be updated or deleted if they have not been used.
- Multiple passcodes in the same lock cannot share the same start and end time, this includes deleted passcodes.
- A deleted passcode cannot be created again with the same start and end time.
- The account you connect must be the top administrator account for the lock, this most likely means the account that initially setup the lock.
- Passcodes and their length are determined by TTLock and cannot be customised.
3 What you need
To use this service you will need:
- A TTLock lock
- The TTLock account that added the lock
4 Set Up
Step 1: Connect your TTLock Account
- On the setup page enter your TTLock username (usually a phone number or email address) and password
- Note that your username must be what you originally signed up for TTLock with. For example, if you initially signed up with an email address, then later added a phone number, you must provide your email address.
Step 2: Set when bookings should send to locks
- The "Start Time" and "End Time" define the earliest Check-in time and latest Check-out time.
- The "Days in Advance" sets the days before check-in that the booking is sent to the lock.
Step 3: Map your locks to your rooms
Bookings will be sent to the lock mapped to the room assigned to the booking.
- Click on "Get Codes"
You will see one identifier and name for each lock. Select the correct lock and save.
For each room/unit click on the name of the lock that is associated with the room.
Step 4: Set up an Auto Action Email to send the PIN to guests
- Go to (SETTINGS) GUEST MANAGEMENT > AUTO ACTIONS.
- Create an Auto Action Email which includes the template variable for the pin which is [BOOKINGINFOCODETEXT:LOCK_PIN].
5 How it works
5.1 Syncing
Bookings are automatically sent to locks the number of "Days in Advance" prior to check-in which you have selected.
Entry codes can only be used during the booking period, they will not provide access before or after.
- Updates to locks are sent periodically, approximately every 12 hours but at no fixed time of day. To instantly send updates, click "Send Bookings to Locks". Updates cannot be sent to locks that are not connected to the internet.
- An entry code named Booking {room id}/{booking id} - {guest name} is added to the lock. Click on the "Lock Data" button to check which bookings have already been sent.
- A booking info code named LOCK_PIN is created on the "Info" tab of the booking, this will show the access code for the booking.
- If a booking date or room changes, those details will update in online locks. Date changes are only possible for codes that have been used at least once.
- If a booking is cancelled, the associated entry code will be deleted from online locks if the code has been used at least once.
- The associated entry code of a booking sent from Beds24 will be removed one day after check-out.
If a TTLock lock is offline codes can be added but not updated or deleted.
5.2 Custom Start and End access times
The access start and end times can be customized per booking using booking info codes.
A booking info code ACCESS_STARTTIME with a time of day (23:00 format) as the text will override the default start time.
A booking info code ACCESS_ENDTIME with a time of day (23:00 format) as the text will override the default end time.
Start and end dates can be set relative to the check in and check out date by defining times greater than 24 or negative.
For example :- ACCESS_STARTTIME = -10:00 will create a start time 10 hours before midnight of the check in day, i.e. 14:00 on the day before check in.
- Booking Info code = ACCESS_STARTTIME
- Booking Info Text = -10:00
For example :- ACCESS_ENDTIME = 34:00 will create an end time of 10:00 one day after checkout (34 = 24 + 10 hours)
- Booking Info code = ACCESS_STARTTIME
- Booking Info Text = 34:00
6 Troubleshooting
Invalid account or invalid password
The username and password you provide must be the same username and password you used to create your TTLock account.
This will not necessarily be the same username you use to login to TTLock. For example, if you initially signed up with an email address, then later added a phone number, the correct username will be your email address.
Cannot see the expected locks The username you enter must be the top administrator account for the lock - most likely this will be the account that initially set up the lock.
7 Disconnect
Delete your username and password and set Synchronize to "disabled" to disconnect.
